background image

E T C   I n s t a l l a t i o n   G u i d e

Unison Aero

®

 SimpleTap Occupancy Sensor

Corporate Headquarters

 

 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA 

 Tel +608 831 4116 

 Fax +608 836 1736

London, UK

 

 Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK 

 Tel +44 (0)20 8896 1000 

 Fax +44 (0)20 8896 2000

Rome, IT 

 

Via Pieve Torina, 48, 00156 Rome, Italy 

 Tel +39 (06) 32 111 683 

 Fax +44 (0)20 8752 8486

Holzkirchen, DE

 

 Ohmstrasse 3, 83607 Holzkirchen, Germany 

 Tel +49 (80 24) 47 00-0 

 Fax +49 (80 24) 47 00-3 00

Hong Kong 

 Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong 

 Tel +852 2799 1220

Service: 

(Americas)

 [email protected]

 

 

(UK)

 [email protected]

 

 (DE)

 [email protected]

 

 

(Asia)

 [email protected]

Web:

 www.etcconnect.com

 

 Copyright © 2014 ETC. All Rights Reserved. 

 Product information and specifications subject to change.

7188M2110

 

 Rev D 

 Released 2014-09 

 ETC intends this document to be provided in its entirety.

Overview

The Aero SimpleTap Occupancy Sensor is a wireless passive Infrared (PIR) 
occupancy sensor that provides battery-free, wireless control of lighting, 
combined with simple installation and long-term maintenance-free reliability.

The SimpleTap Occupancy Sensor requires no wiring connections and uses no 
batteries. It communicates with Aero power controllers to manage lighting 
within interior spaces. The sensor detects motion and sends a signal to Aero 
controllers to switch circuits on or off automatically.

Solar cells provide power to the sensor.

Preparation

The SimpleTap Occupancy Sensor can be surface-mounted to any ceiling. The 
Sensor should be installed in the room where the Aero controller is controlling 
the light fixtures or circuits.

After exposure to light for at least 4 hours the sensor will function for several 
days in complete darkness. For best results, the Sensor should be mounted in 
a location that has some exposure to light on a daily basis.

The Sensor is calibrated to detect body movement, but small objects will not 
trigger the sensor.

Model

Model

Description

UAOS-5

Aero SimpleTap Occupancy Sensor, white 

Содержание Aero SimpleTap Occupancy Sensor









Отзывы: