manualshive.com logo in svg

ETAS XETK-V1.0, Руководство пользователя, Страница: 27 / 71

Поделиться
Скачать
ETAS XETK-V1.0 Скачать руководство пользователя страница 27

XETK-V1.0 - User’s Guide

27

ETAS

Hardware Description

4.9

XETK Ethernet Interface

The XETK Ethernet interface can directly connected to the PC. No additional 
ETAS module is required for the access to the ECU.
The interface is a standard full duplex 100Base-TX Ethernet interface. The XETK

 

Ethernet interface is integrated in the ETAS IP world with automatic IP manage-
ment and supports the open automotive "Universal Measurement and Calibra-
tion"  standard  "XCP on Ethernet" (TCP/IP, UDP/IP). The open XCP on Ethernet 
interface allows to connect the ES582.1 in third party application software. 

The maximum length of the interface cable is specified for 30 m.

Fig. 4-13

Location of the Ethernet Interface

Note

The XETK Ethernet interface is not compatible with the standard ETK interfaces 
in modules like e.g. ES910.2, ES590, ES1232-A.

The XETK Ethernet interface is compatible with the ES600 module.

CON4

Содержание XETK-V1.0








































































Отзывы:

Нет отзывов