ETAS ES600 Series, Руководство пользователя

Страница: 29 / 42

ETAS Technical Data
ES620.1 - User Guide 29
5.8.2 Software
INCA V4.0 and higher is required for the configuration of the ES620.1 and for
control and data acquisition. INCA V5.2.1 and HSP4.1 and higher are required
for use of B-, E-, R-, S- and T-type thermocouples. It is not possible to run the
ES620.1 with earlier INCA versions.
5.9 Electrical Data
5.9.1 Power Supply
5.9.2 Host Interface
Operating voltage (reverse-polarity
protected)
7 to 29 V ±10 % (DC); load-dump pro -
tected
Power consumption (operation) max. 4.3 W
Power consumption (standby) typ. 50 mW
Fuse MINI, fast, 58 V, 3 A
Port Base-T Ethernet; 10 Mbps
Protocol TCP/IP
IP address dynamic via INCA
NOTE
For the successful initialization of the network card of your PC, observe chap -
ter 5.8.1 on page 28.