ETAS ES593.1-D Скачать руководство пользователя страница 17

Страница: 17 / 71

ETAS

Hardware Description

ES593.1-D

User Guide

4.5.2

Operational State of the Module

Four LEDs can be found top left on the front panel of the ES593.1-D(see Fig.

page

16). They indicate operational, error and synchronization states.

•

: power supply and operational state

•

: error states or firmware update

•

°C

: temperature inside the housing

•

SYNC

: synchronization function of the module (master or slave) and the

synchronization state

•

MODE

: function "Pre-Buffering" (interfaces CAN1 and CAN2)

LED

Display

Operational State

Green

The module is powered on.

Green, flashing

(Flash code 3)

The module is on “Standby”, the power

consumption is minimal. The module

needs a wakeup event to enter the nor

mal operation mode.

Off

The module is not powered.

Red

Module is currently booting or booting

was unsuccessful.

Red, flashing

(Flash code 1)

Internal device software error, core file

created.

Red, flashing

(Flash code 2)

Firmware update is being executed.

Off

No error

°C

Red

Temperature inside the housing has

exceeded the critical level and the mod

ule powered down; the module is pow

ered on again if the temperature inside

the housing has reached the normal

operational range

Red

(Flash code 2)

Temperature inside the housing has

reached a critical level. The module

does not shut down any functionality.

Off

Temperature inside the housing is in

normal operational range.

Содержание ES593.1-D








































































Результаты поиска

Содержание ES593.1-D

Отзывы:

ETAS ES593.1-D, Руководство пользователя, Страница: 17 / 71

Результаты поиска

Содержание ES593.1-D

Отзывы: