ETAS ES583.1, Руководство пользователя

Страница: 7 / 34

ETAS General
ES583.1 - User's Guide 7
2 General
The introductory chapter provides information about the basic safety notices,
product return and recycling, use of this manual, system requirements for oper
-
ating the module, scope of supply and additional information.
2.1 Basic safety notices
Requirements for users and duties for operators
The product may be assembled, operated and maintained only if you have the
necessary qualification and experience for this product. Improper use or use by
a user without sufficient qualification can lead to damages or injuries to one's
health or damages to property.
General safety at work
The existing regulations for safety at work and accident prevention must be
followed.
2.1.1 Intended use
This product was developed and approved for automotive applications. For use
in other application areas, please contact your ETAS contact partner.
Requirements for operation
The following requirements are necessary for safe operation of the module:
• Observe the notes for the ambient conditions (see chapter 6.1.2
on page 23).
• Ensure compliance with the connection and settings values (see chapter
6.2.1 on page 24).
• Use the product only according to the specifications ion the correspond -
ing user's guide. For any other use, the product safety is not ensured.
• Observe the regulations concerning electrical safety and the laws and
regulations concerning occupational safety applicable at the application
site!
• Do not use the product in a potentially explosive atmosphere.
WARNING
This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate
measures.