ES5371.1 Carrier Board for ES443x Load Boards - User’s Guide
24
Pin Assignment and Connections
ETAS
3.3
Battery Voltages (CO101)
Plug (on board)
: WAGO picoMAX
®
(Item No. 2092-1424)
Female connector (provided)
: WAGO picoMAX
®
(Item No. 2092-1104)
Fig. 3-3
Plug on ES5371.1 (Left) and Female Connector with Gripping Plate
(Right)
Tab. 3-2
CO101 Pin Assignment
The female connector is specified for wire cross-sections of 0.2 - 2.5 mm
2
. Flexi-
ble/rigid wires with/without wire ferrules can be used. Please make sure you
heed the assembly recommendations of the manufacturer, WAGO.
Pin
Signal
1
+UBatt
2
+UBatt
3
-UBatt
4
-UBatt
CAUTION!
The ES5371.1 Carrier Board for ES443x Load Boards is not protected
against the polarity of the UBatt voltage being mistaken.
There are two fuses for protecting the UBatt voltage on the
ES5371.1. The ES4435.1 Current Source Load Board is protected
against the polarity of the UBatt voltage being mistaken.
Note
When removing the female connector, first push in the orange platelet of the
gripping plate (against the direction of tensile force) toward the plug!
Pin
1
Pin
2
Pin
3
Pin
4
Содержание ES5371.1
Страница 1: ...ES5371 1 Carrier Board for ES4435 Load Boards User s Guide...
Страница 20: ...ES5371 1 Carrier Board for ES443x Load Boards User s Guide 20 Features and Functions ETAS...
Страница 30: ...ES5371 1 Carrier Board for ES443x Load Boards User s Guide 30 ETAS Contact Addresses ETAS...
Страница 32: ...ES5371 1 Carrier Board for ES443x Load Boards User s Guide 32 Figures ETAS...