ES5340.2 Electric Drive Simulation Board - User’s Guide
89
ETAS
Configuring the Hardware in LABCAR-RTC
4. With the option "SYNC/Clock Source", the output
can be synchronized to the current motor angle or
a phase-shifted angle (e.g. for predicting current
values) can be used.
5. With the "WaveformTable" option, you can edit the
desired output in the form of a table.
6. Select the "Data" tab to configure default values
for the outputs.
5.3.4
Analog Inputs
The four analog inputs of the ES5340.2 can be used to measure analog signals
from the ECU.
Adding an Analog Input
1. Right-click the "ES5340-Master" item and select
Add Item
.
2. In the list, select the "ES5340-Analog-In" item and
click
OK
.
The item is added.
Содержание ES5340.2
