ETAS ES5340.2, Руководство пользователя

Страница: 41 / 120

ES5340.2 Electric Drive Simulation Board -User’s Guide 41
ETAS Hardware Description
3.4 Output Multiplexers for the Digital Signals
Each digital output has a multiplexer that can be used to define the signal for this
output.
Sources for the Digital Outputs
The digital output channels can be driven by different sources:
• FPGA model outputs
• Signals of the type "Digital Direct Out" and digital arbitrary signals (incl.
position sensor)
• SENT signals (ES5340-Out-SENT-V3)
• The delayed control signals for the inverter: six inverter control signals
with an adjustable time delay can be output to the ECU for diagnostic
purposes.
The sources are configured in LABCAR-RTC with the "ES5340-Digital-Out-Mux"
item, "Signals" tab in the "Output Select" column. In addition to the signals
configured by the user, the inverter gate signals are always available here that
can be sent back to the ECU (in some cases, with an adjustable delay).
For a ES5340.2-M, eight signals can be configured for the outputs here; for a
ES5340.1-S, an additional six can be configured.
Note
For slave cards (ES5340.1-S), only "Digital Direct Out" can be selected.