ETAS ES5340.2, Руководство пользователя

Страница: 36 / 120

ES5340.2 Electric Drive Simulation Board -User’s Guide 36
Hardware Description ETAS
3.2 Output Multiplexers for the Analog Signals
Each analog output has a multiplexer that can be used to define the signal for
this output.
Sources for the Analog Outputs
The analog output channels can be driven by two different sources:
• Outputs of the FPGA model
• Signals of type "Analog Direct Out" and analog arbitrary signals (incl.
position sensors such as resolvers and sine encoders)
The sources are configured in LABCAR-RTC with the "ES5340-Analog-Out-Mux"
item, "Signals" tab in the "Output Select" column.
For a ES5340.2-M, eight signals can be configured for the outputs here; for a
ES5340.1-S, an additional six can be configured.
Note
For slave cards (ES5340.1-S), only "Analog Direct Out" can be selected.