ETAS ES523.1, Руководство пользователя, Страница: 44 / 67

ETAS Technical Data
ES523.1 - User Guide 44
The WEEE symbol (see Fig. 8 - 1 on page 43) on the product or its packaging
shows that the product must not be disposed of as residual garbage.
The user is obliged to collect the old devices separately and return them to the
WEEE take-back system for recycling.
The WEEE directive concerns all ETAS devices but not external cables or batter
-
ies.
For more information on the ETAS GmbH Recycling Program, contact the ETAS
sales and service locations (see chapter “Contact Information” on page
64).
8.7 Declarable Substances
European Union
Some products from ETAS GmbH (e.g. modules, boards, cables) use compo -
nents with substances that are subject to declaration in accordance with the
REACH regulation (EU) no.1907/2006.
Detailed information is located in the ETAS download center in the customer
information "REACH Declaration" (
www.etas.com/Reach ). This information is
continuously being updated.
8.8 Use of Open Source software
The product uses Open Source Software (OSS). This software is installed in the
product at the time of delivery and does not have to be installed or updated by
the user. Reference shall be made to the use of the software in order to fulfill
OSS licensing terms. Additional information is available in the document "OSS
Attributions List" at the ETAS website
www.etas.com .
8.9 System Requirements
8.9.1 Hardware
Operation of the module requires a power supply voltage of 7 V to 29 V DC.
PC with one Ethernet interface
A PC with one open Ethernet interface (100 Mbit/s, full duplex) with RJ-45 con -
nection is required. Ethernet interfaces that are implemented with an additional
network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful initialization of the module
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!