ETAS ES4435.1, Руководство пользователя

Страница: 12 / 20

ES4435.1 Current Source Load Board - User’s Guide 12
Hardware ETAS
2.1.3 Calibrating the Circuit
The current sources can be calibrated by ETAS. The order data is shown below:
2.2 Configuration in LABCAR-RTC
To configure the individual current sources of the ES4435.1 Current Source Load
Boards used:
• Open your hardware configuration in LABCAR-RTC.
• Select the “ES4435-Current-Sources” device.
• Select the “Signals” tab.
To see the operation mode
• Select the channel to be configured (the relevant
current source 0...23)
• Select the operation mode in the “Operation
Mode” column
To select the battery node
• Select the relevant battery node (from the “Battery
Node” column) against which the current source is
to be configured.
Order Name Short Name Order Number
Calibration Service for ES4435 K_ES4435 F-00K-106-387