ETAS
Getting Started
ES430.1 - User’s Guide
47
To connect to other modules:
1. Assemble other modules in accordance with the procedure
described in the section 6.2.2 on page 43
Fig. 6
-
8
Connecting to Other Modules
6.2.4
Attaching ES400 Modules on DIN Rails with the Integrated
Assembly Elements
With the integrated assembly elements of the ES400 modules, you can not only
connect the modules with each other, but also with DIN rails.
For this fastening variant, you connect the ES400 module with the DIN rail using
an ES4xx angle bracket (left). The screw connection follows the principle of
connecting several modules.
Fasten the ES400 modules on DIN rails with the integrated assembly elements
using the following steps:
1. Connect the module with the ES4xx angle bracket (left).
2. Connect the module with additional modules
(as required).
3. Connect the ES4xx angle bracket with the DIN rail.
Fig. 6
-
9
Fastening to an ES4xx Angle Bracket (left) using the Integrated
Assembly Elements
