ETAS ES160.1, Руководство пользователя

Страница: 27 / 48

ETAS Commissioning
ES16x.1 - User Guide 27
4.2.3 Manual Configuration of the Connection Speed (Automotive
Ethernet)
The connection speed of the Automotive Ethernet interface can be set manu -
ally via a web interface.
1. Open a browser and enter the IP address of the module.
2. Click
Configure .
3. Remove the checkmark at Auto Config in the area AE .
4. Mark the desired connection speed (1000/100) in the area
AE SPEED .
5. Click Save to confirm the input.
4.2.4 Resetting Data Loss Errors
If different speed settings exist in the two interfaces of the converter due to the
system configuration, with higher data throughputs this can result, in principle,
to data losses. This is not a device error. The devices display these losses via
the
Data Loss LED (see Chapter “LEDs” on page 16).
1. Open a browser and enter the IP address of the module.
2. Click
Configure .
3. Click Clear Data Loss
or
4. Disconnect the module from the power supply.