ETAS CBN101.1, Руководство пользователя

Страница: 5 / 34

CBN101.1/CBN103.1/CBN105.1/CBN107.1 - User’s Guide 5
ETAS General
1 General
The introductory chapter informs you about the basic safety information, prod-
uct return and recycling, the use of this manual, the scope of delivery and other
information.
1.1 Basic Safety Instructions
1.1.1 Labeling of Safety Instructions
The safety instructions contained in this manual are identified by the general
danger symbol shown below:
The safety instructions shown below are used for this purpose. They provide
notes about extremely important information. Please read this information very
carefully.
1.1.2 General safety information
Please observe the product safety advice ("ETAS Safety Advice CBN" and the
subsequent safety instructions to avoid any impact on your health or damages to
the device.
Carefully read the documentation that belongs to the product (ETAS Safety
Advice CBN and this User’s Guide) prior to the startup.
ETAS GmbH does not assume any liability for damages resulting from improper
handling, unintended use or non-observance of the safety precautions.
1.1.3 Requirements for users and duties for operators
The Isolating Measurement Probe product may be commissioned and used only
by qualified electricians for high-voltage systems (BGI/GUV-I 8686 of the DGUV,
minimum Level 2).
DANGER!
Identifies an immediate danger with high risk, which could result in
death or severe bodily injury if it is not avoided.
WARNING!
Identifies a possible danger with medium risk, which could result in
death or (severe) bodily injury if it is not avoided.
CAUTION!
Identifies a danger with low risk that could result in slight or moder-
ate bodily injuries or property damage if it is not avoided.
Note