Etac Transit lll, Руководство пользователя

Страница: 3 / 28

3
The manual must be read thoroughly to avoid damage when handling and using the Transit chair.
is a warning triangle to indicate that special care should be taken.
(!)
provides advice and tips worth considering
1 General
The tool kit contains: 5 Allen keys: d6, 5, 5, 4 and 3 mm
3 Ring spanners: 13, 10 and 8 mm
1 Socket spanner: 24/19 mm
1 Phillips screwdriver
Transit is a manual cross-folded transportation wheelchair with variation options that is primarily intended for outdoor
use. The angle of the seat is adjustable. Backrest and footrests are adjustable in height and angle. In addition there is a
range of options and accessories: Various types of legrests, seat cushions, height-adjustable push handles, anti-tips etc.
Transit is easy to handle and has excellent seating comfort, functionality and manoeuvrability.
Crash test
Etac’s wheelchairs are tested in accordance with ISO 7176-19 and 10542. These ISO standards specify requirements
for the design of the wheelchair’s restraint points, how the wheelchair and the user are secured in the vehicle and
describe how testing should be carried out and how the test results are to be interpreted. Etac’s wheelchairs are crash
tested at the Technical Research Institute of Sweden. The test was carried out with normal settings on the wheelchairs
(see manual for the respective chair) and with an UNWIN_WWR/ATF/K/R restraining device and an
UNWIN_WWR/HD/ATF/K/R 3-point belt.
The cross-folded wheelchairs Cross, Twin and Transit were supplemented with securing points.
Seat widths: 35, 40, 45, 50 and 55 cm
Seat depth: 42 cm
Max. user weight: 135 kg
Seat height front: 51 cm
Seat height back: 49 cm
Backrest height: Standard 40 cm. Adjustable to 42.5, 45 or 47,5 cm.
Rear wheel: 16” x 2” pneumatic rear wheel, fixed axle
Transit is supplied with a lockable legrest by which the chair can be carried.
The height of the armrest is 26 cm from the seat.
Service life: The product is tested and fulfils the demands stated in EN 12183. The main product’s durability and life-
time is at least five years when used in accordance with intended use, the safety instructions, the reconditioning manual
and instructions for use in the user manual. The main product consists of the chassis for seat and back support. Addi-
tional parts/accessories are handled in accordance with the manual and reconditioning manual. The actual lifetime can
vary, depending on how much and how intensively the product is being used, but a maximum of 10 years. Thereafter
the product must be decommissioned.
The following methods of surface treatment have been used:
Lacquered surfaces=Polyester powder coating
Non-lacquered aluminium parts=Anodized coating
Non-lacquered steel surfaces=Galvanized