manualshive.com logo in svg

Etac Crissy Active, Руководство пользователя, Страница: 47 / 48

Поделиться
Скачать
Etac Crissy Active Скачать руководство пользователя страница 47

47

Etac / Crissy / www.etac.com

14. Tests and guarantees

CE marking, tests:

The product complies with the Medical Device Directive 93/42/

EEC.

The product has been tested and complies with the require-

ments set out in EN 12183, which includes ISO 8191-2.

Combination agreements exist – see www.etac.com.

Etac’s wheelchairs have been tested in accordance with ISO 

7176-19. They have been crash-tested by the Technical Research 

Institute of Sweden. Testing was carried out using restraining 

device UNWIN_WWR/ATF/K/R and 3-point seat belt 907523, 

Klippan Safety AB.

Service life:

The anticipated durability and service life of the main product 

is at least five years when used as intended, and in accord-

ance with the safety instructions, reconditioning manual and 

maintenance instructions available in the user manual. The 

main product comprises the seat and back frame. Other parts/

accessories are managed in accordance with the manual and 

reconditioning manual. The actual service life may vary depend-

ing on how often and how intensively the product is used, but 

is at most 10 years. If the product is intended for use after the 

service life period specified by Etac, it is the responsibility of the 

product owner to ensure product functionality in accordance 

with the manual and reconditioning instructions. If this cannot 

be ensured then the product should be taken out of use.

The following methods of surface treatment have been 

used:

Lacquered surfaces = Polyester powder coating or ED lacquering 

Non-lacquered aluminium parts = Anodised coating 

Non-lacquered steel surfaces = Galvanised

Non-lacquered/galvanised steel surfaces  = Stainless steel

The product is protected from corrosion.

Guarantee:

5-year guarantee against material and manufacturing defects. 

For terms and conditions, see www.etac.com. 

Special adaptations:

comprise everything that falls outside the instructions and set-

tings in the manual. Wheelchairs specially adapted by customers 

are not eligible for Etac’s CE marking. Etac’s guarantee no longer 

applies. If there are any doubts concerning the adaptation, 

please contact Etac for advice. 

If the wheelchair is used in combination with another product, 

neither product may keep the CE marking unless a combination 

agreement is in place. Please contact Etac for up-to-date infor-

mation.

To be sorted according to national regulations

Содержание Crissy Active

















































Отзывы:

Нет отзывов