25
Etac / Crissy / www.etac.com
User manual
Footplates
Adjust the height so that you feel the feet are supported
and the thighs rest against the cushion.
For outdoor use the footplates should be raised 4 to 5 cm
above the ground.
Tipping risk!
Never stand on the footplates
Angle adjustment
Adjust the angle of the footplates so that the ankles are
at a 90° angle.
Adjusting the height
Fully loosen the locking handle on the leg support.
Remove the screw. Set the height. Replace the screw and
handle. Tighten securely.
Changing the depth of the foot supports
Adjust the depth of the foot supports by switching the
right and left foot support. Do not forget to adjust the
angle.
Arm support (adjustment)
•
Loosen the screws on the inside of the arm support tray.
•
Move the arm support up or down to the desired height
and tighten the screws.
•
Correctly adjusted arm supports provide upper body
support. The arm support plate should be approximately
5 mm higher than the elbow when bent at an angle of
90°.
5 mm
3 mm
Seating comfort settings
Calf/Heel strap
•
Adjust the length so that the feet are centred on the
footplates.