32
33
12 Assembly instructions accessories
12:4 Armrest, flip-up, height adjustment
The flip-up armrest comes in two
varieties, height settable and fixed.
It is mounted onto the wheelchair’s
frame and can be flipped upwards/
backwards by pressing the red lever
(A) inwards.
Mount the armrest according to the
assembly instructions supplied.
The armrest height is settable
between 22 and 30 cm with 1 cm
intervals.
-
Push the red lever to one side
and loosen the screws that
fix the armrest bracket to the
frame.
-
Slide the armrest up or down
to the desired height.
-
Tighten the screws again.
12:5 Positioning belt
The positioning belt is in two parts,
is adjustable in length and has a
snap-lock. It can be mounted either
in the backrest joint (A) or in the
holes just in front of the backrest
joint (B), above the wheel mounts.
Assembly instructions are supplied
with the belt.
(!) Ensure that the user does
not slide forwards in the seat
as this can lead to the belt
impairing the supply of blood
to the hip/waist area.
A
Tools: 3 mm
Allen key.
Never use the armrests to
lift the wheelchair.
(!)
These armrests cannot
be combined with a cane
holder or with 24" or 22"
rear wheel in position C.
The belt is to be used
only for positioning in
the wheelchair. It must
not be used as a substi-
tute for a safety belt in
a car.
We recommend the front
position (B). It counte-
racts sliding forward
more effectively.
A
B
