eta Fresh water module 33, Руководство по эксплуатации

Страница: 37 / 44

ETAtouch controller Software version X.36.0 and later
37
you will have hot water for showering shortly
afterwards.
This runtime (outside the time window) is set in the
text menu (parameter [Circulation pump delay]).
Enter the same value as parameter [Circulation
runtime]. 10.2.1.1 Setting the hot water charging times
Open the overview screen of the set charging
times and temperatures
The standby times for the hot water and the set tem-
peratures can be adjusted in the settings (
button).
To adjust, open the settings and then open the standby
times of any given day with the
[Stand-by times
Daily plan] button. An overview screen opens.
Fig. 10-7: Overview
1 Set time windows (standby times)
2 Select day of the week
3 Add another time window
4 Graphical representation of the time window
setting
5 Overview of all time windows for the entire week
6 Delete time window
7 Adjustable hot water temperature within the time
window
8 Period of the time window
9 Set-back temperature of the hot water outside the
time window
Setting the time window and copying to other
days of the week is described in chapter
10.2.2
"Setting a time window" .
If a circulation pump is also installed (and the
function [Self-learning] is switched off), these
operating times are set in the same way (button
[Circulation times Daily plan]).
Circulation
Circulation pump delay