eta AQUATIC 2266, Инструкция по эксплуатации

Страница: 25 / 52

B8 – J et for windows and flat surfaces B8a – Adapter
B8b – Small mopping textile
B8c – Squeegee for windows and flat surfaces
B8d – Textile sleeve
C – Extension adapter
C1 – Handle
C2 – Steam discharge button
C3 – Handle lock button PUSH
C4 – Steam unit lock button PUSH
D – Mopping nozzle
D1 – Foot button for additional spraying
D2 – Water/detergent tank
D3 – Mopping textile (2x)
D4 – Carpet adapter
D5 – Jet release button
E – Put aside stand
F – Water replenishing container
(for D2 tank)
G – Sack to store small accessories
Optional accessories order numbers: B1 (ETA226600280), B2 (ETA226600260), B3-B7 (ETA226600250),
B8+B8a (ETA226600290), B8b (ETA226600230), B8c (ETA226600270), B8d (ETA226600240),
D3 (ETA226600220) and E (ETA226600300).
III. INSTRUCTIONS FOR USE
Remove all packaging materials and take out the appliance with accessories.
Remove all adhesive foils, stickers or papers.
A) STEAM MOP
If you are going to use the appliance particularly for mopping and cleaning floors, assemble
it as follows: connect steam unit A , handle C1 and mopping nozzle D to the adapter C . When
disassembling the set, first release the lock mechanisms (steam unit A by button C4 , handle
C1 by button C3 , mopping nozzle D by button D5 ), and only then dismount the individual
parts of the mopping adapter. If the above-described set is used, mopping nozzle D may
be added with the mopping textile
D3
put on, or with the carpet adapter
D4
clicked in place,
secured by 4 locks. To remove the adapter, you have to release 2 locks in the rear part by
pressing them down, and remove the adapter.
B) HANDHELD STEAM CLEANER
If you are going to use the appliance as a handheld steam cleaner, remove the steam unit A
from the extension adapter C by pressing the lock button C4 .
Accessories assembly options (Fig. 2)
Steam cleaner may be used in many assembly variants, keeping the following rules:
– Concentrating nozzle B1 and extension hose B2 may only be installed on steam nozzle
A6 . Both adapters can be used either separately, or with the accessories B3-B8 mounted.
– Accessories B3-B8 can be put on the concentrating nozzle B1 , or on the extension hose B2 .
– The nozzle for windows and flat surfaces B8 may be used as follows:
a) With adapter B8a and the small mopping textile B8b put on (using Velcro fastener)
b) With the squeegee for windows and flat surfaces B8c put on
c) With the textile sleeve B8d put on
GB
25 / 47