– The appliance must not be immersed in water or other liquids (not even partially)! If the
appliance falls in water, do not take it from the water! First disconnect the power cord plug
from the electrical socket, and then take out the appliance from the water. In such cases,
bring the appliance to a specialised service centre to verify its safety and proper operability.
–
ATTENTION
: Do not use this heater in series with an external timer, remote controller or
any other device that switches on the appliance automatically, since a fire risk exists when
the heater is accidentally covered or displaced at the moment it switches on.
– The product is intended for home use. It is not intended for commercial use!
–
This appliance is not intended for outdoor use.
–
Do not plug the power cord in the electrical socket and do not unplug it with wet hands
or by pulling the power cord!
Do not handle the appliance with wet hands.
–
The appliance must not be used in a damp or wet environment and in any environment with
the danger of fire or explosion (
premises where chemicals, fuels, oils, gases, paints
and other flammable or volatile materials are stored
).
–
After use, disconnect the appliance from the mains and let it cool down.
Before long-term storage, pour out the remaining water.
–
Never connect the appliance to the mains when the tank is empty! Once steam production
stops, the internal tank is empty, and must be replenished following the steps described below.
–
Only fill the water tank after unplugging the power cord from wall socket.
–
Only fill the water tank with clear water. Do not use any chemical agents and other liquids,
such as rust removers, aromatic substances, alcohol, various detergents, etc.
ATTENTION – Steam! Risk of scalding!
This appliance produces hot steam. This means that not only the cleaning adaptors,
but also the surfaces and items being cleaned are very hot! Therefore NEVER touch
the appliance’s hot surface and the spots being cleaned using the appliance, and
before exchanging the adaptors and maintenance, let everything cool down first.
–
Make sure before use that all items, surfaces and fabrics to be cleaned are resistant to hot
steam temperature. Do not clean for example wooden surfaces, leather, waxed furniture
or floor, or fine clothes, such as silk or velvet, without first reading the manufacturer’s
instruction manual and making a test on a small, less visible part of the item to be cleaned.
–
Do not aim the steam flow at toxic substances, acids, thinners, detergents or aggressive
substances. Handling and removing such substances and any similar ones may only be
made in accordance with the instruction provided by the manufacturers.
–
Do not aim the steam flow at explosive powders or liquids, carbohydrates, open fire
or extremely hot items.
–
Do not use the appliance to clean pressure vessels, containers filled with liquids or
containers with unknown content as there is a potential risk of their tear or explosion.
–
Do not clean a single spot for too long. Otherwise the surface/item cleaned to long may
incur damage.
–
Attention! After releasing the steam trigger, a small amount of steam is discharged from
the nozzle for several seconds – risk of scalding.
– Never use the window squeegee on a surface, which is cold, because such surface may
crack. When the weather is cold and the temperature is low, first pre-heat the glass from
a distance of about 40 cm.
–
Do not insert any items in the openings of the appliance or accessories – openings
must not be blocked by anything (for example by clots, dust, hairs, etc.).
–
Keep a distance between the openings / rotating components and your hair, loose clothes
and any body parts.
–
Never aim the detergent flowing from the steam nozzle at persons, animals, plants or any
appliances containing electrical components (for example
inside furnaces, driers
, etc.).
GB
23 / 47
