eta 13180LP-T Скачать руководство пользователя страница 49

Страница: 49 / 88

ETAtouch controller

[Hot water tank] function block

5.5.1

Setting the hot water charging times

Open the overview screen of the set charging
times and temperatures

The charging times for the hot water and the set tem-
peratures can be adjusted in the settings (

button).

To adjust, open the settings and then open the
charging times of any given day with the

[Charging

times Daily plan] button. An overview screen opens.

Fig. 5-58: Overview

Set time window (charging times)

Select day of the week

Add another time window

Graphical representation of the time window
setting

Overview of all time windows for the entire week

Delete time window

Adjustable hot water temperature within the time
window

Period of the time window

Set-back temperature of the hot water outside the
time window

If an additional circulation pump for hot water is
installed, the operating times of this are set in the

same way (

[Circulation times Daily plan] button).

Setting the time window and copying to other
days of the week is described in chapter

5.1.6.6

"Setting a time window"

5.5.2

Text menu - Adjustable parameters

Commonly used parameters can be found in the
settings

Commonly used parameters can be found in the
function block settings (

button). There, the

parameters are identified by the

symbol and can be

adjusted by tapping. This saves you having to search
through the text menu for these parameters.

Adjustable parameters

Detailed descriptions of the parameters are provided
below.

Explanation of [Switch-on diff.]

This parameter regulates how far the current warm
water temperature can fall before the hot water tank
again demands heat from the buffer or boiler.

If the value is set to 15 °C, the current hot water
temperature may drop by 15 °C from the value

[Hot water tank target]. The hot water tank only
demands heat from the buffer or boiler when this
happens.

Explanation of [HW bottom off]

Optional: only with additional [Hot water tank bottom]
temperature sensor

This parameter defines when charging of the hot water
tank will end. As soon as the additional [Hot water tank
bottom] temperature sensor in the hot water tank
reaches the adjustable [HW bottom off] temperature,
charging of the hot water tank ends.

Hot water tank

Switch-on diff.

HW bottom off

a. Only visible with additional temperature sensor

Solar heat diss.

b. Only visible for buffers with solar heating system

Priority

c. Only visible for solar heating systems with switchover

between several tanks

Circulation

d. Only visible with additional circulation pump

Circulation runtime

Circulation pause

Содержание 13180LP-T

























































































Результаты поиска

Содержание 13180LP-T

Отзывы:

Бренды по названию

Популярные бренды

eta 13180LP-T, Операция

Результаты поиска

Содержание 13180LP-T

Отзывы:

Бренды по названию

Популярные бренды