ESYLUX ELC SmartDriver Series Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 108

ESYLUX ELC SmartDriver Series Скачать руководство пользователя страница 37

Setting via remote control

Doc. no. BA012497_02

36 / 107

GB

6

Setting via remote control

The Light Control Box settings can be input via remote control. If additional
Light Control Boxes are connected to a Light Control Box, all of the Light

Control Boxes assume the settings of the first Light Control Box.

The infrared remote control Mobil-PDi/MDi-universal (ep10433993) makes
it simple for electricians and users to set parameters and special functions.
This remote control is available as an accessory.

1.

4.

6.

1.

3.

5.

2.

Key button

2. Navigation buttons

,

,

,

3. Home button

4. SD button

5. OK button

6. Return button

For optimum reception, point the remote control directly at the presence
detector when programming the settings.

In direct sunlight, the standard remote control range of approx-
imately 8 m may be reduced due to the infrared proportion of
sunlight.

The Mobil-PDi/MDi-universal remote control offers functionality for virtually
all ESYLUX remote controls. If ESYLUX makes improvements to the remote
control menus or commands, you can update the universal remote control.
Simply download the latest software version for one of the implemented
remote controls from the ESYLUX website to an SD card. Unscrew the
bottom cover on the rear of the remote control to insert the SD card into the
universal remote control. Select the menu item <System/Software> on the
universal remote control to update the device.

For the settings of the Light Control Box, select the X-Light Control remote
control. Following selection, this remains the default remote control.

Universal

remote

control

«
...
35
36
37
38
39
...
»

Содержание ELC SmartDriver Series













































































































Отзывы:

Нет отзывов