ESX XENIUM XE6440-DSP V2, Руководство пользователя

Страница: 30 / 36

30
HIGH LEVEL
INPUT
E / F / G / H
LINE OUT
SPEAKER
OUTPUT
BATT.
+12V
GND
XE4240-DSP
V2
4-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
ON
ONLY WITH HIGH LEVEL INPUT
GND
HIGH LEVEL
INPUT
F+
F -
E+
E-
SPEAKER
OUTPUT
BATT.
+12V
G/H
LINE OUT
XE6440-DSP
V2
6-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT PC CONNECT USB
AUX
INPUT
AUX
INPUT
REM
IN/OUT
REM IN/OUT
AUTO TURN ON
OFF
ON
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF
PC CONNECT USB
FUNCTIONAL INSTRUCTIONS
In the „TIME ALIGNMENT“ section you have the possibility to calculate
the run-time correction of the individual channels by X-CONTROL 2 , to
optimally align the sound system and the DSP device to the acoustic
stage center. To do this, follow these steps:
• First measure the distance of all loudspeakers of the sound system
to the acoustic stage center (for example, the driver’s seat at the ear
level of the driver).
• Then enter the measured distance values under „TIME ALIGN-
MENT“ for each channel in the corresponding input field in centime-
ters (CM).
• When you have entered all the distance values, press “DelayCalc” .
X-CONTROL 2
then calculates the appropriate parameters and trans-
fers them automatically to the respective channel from A to H. Then
you can fine-tune the channel sections with the “Delay” slider.
• With “Reset” you can reset all values.
• With the loudspeaker symbol in each channel you can mute the
respective channel.
16
16
Under
„REMOTE SETTING“
you are able to select, with which channel
pair (EF Channel or GH Channel) you want to control the bass level with
the connected remote controller. Therefore, always select the channel
pair, on which you have connected the subwoofer.
17
17