24
HIGH LEVEL
INPUT
E / F / G / H
LINE OUT
SPEAKER
OUTPUT
BATT.
+12V
GND
XE4240-DSP
V2
4-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
ON
ONLY WITH HIGH LEVEL INPUT
GND
HIGH LEVEL
INPUT
F+
F -
E+
E-
SPEAKER
OUTPUT
BATT.
+12V
G/H
LINE OUT
XE6440-DSP
V2
6-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
PC CONNECT USB
AUX
INPUT
AUX
INPUT
REM
IN/OUT
REM IN/OUT
AUTO TURN ON
OFF
ON
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF
PC CONNECT USB
FUNCTIONAL INSTRUCTIONS
AMPLIFIER FEATURES AND OPERATIONAL CONTROLS
HIGH LEVEL
INPUT
E / F / G / H
LINE OUT
SPEAKER
OUTPUT
BATT.
+12V
GND
XE4240-DSP
V2
4-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
ON
ONLY WITH HIGH LEVEL INPUT
GND
HIGH LEVEL
INPUT
F+
F -
E+
E-
SPEAKER
OUTPUT
BATT.
+12V
G/H
LINE OUT
XE6440-DSP
V2
6-CHANNEL AMPLIFIER WITH
DIGITAL SOUND PROCESSOR
POW.
PRT.
REMOTE
OPTICAL
INPUT
PC CONNECT USB
AUX
INPUT
AUX
INPUT
REM
IN/OUT
REM IN/OUT
AUTO TURN ON
OFF
ON
ONLY WITH HIGH LEVEL INPUT
AUTO TURN ON
OFF
PC CONNECT USB
1
6
7
4
Input for the
AUDIO/AUX/REM CABLE-SET (10-PIN)
.
The
LINE OUT
RCA jacks
G/H
of this cable-set deliver a linear full range signal to operate additional amplifiers or devices, which
can be modified by the DSP software.
Connect the
AUX IN
RCA jacks with external audio sources like MP3 player, smart phones, navigation systems and like by using
suitable cables.
Input for the
SPEAKER OUTPUT CABLE-SET (4-pin)
. Use this output to operate 2 speakers with a load capacity of approx.
2 x 70/100 Watts RMS on 4/2 Ohms. Optionally you can operate also a subwoofer with a load capacity of approx. 200 Watts
RMS/Max. on 4 Ohms bridged.
The
OPTICAL
input is suited for a Toslink cable connection with an external audio source that provides a SPDIF signal (stereo
PCM).
If necessary, connect the mini-USB port by using the enclosed USB cable to the computer on which the
X-CONTROL
soft-
ware is installed. The connection can be released after using the DSP software.
Do not extend the cable in any way with a passive USB extension because otherwise a flawless communication between
the DSP amplifier and the PC can not be ensured. If you have to bridge longer distances, use an active USB extension with
integrated repeater.
The LED next to the USB port lights up blue when a connection between DSP device and computer is made via the USB cable.
POWER/PROTECT
If the
POWER LED
lights up, the amplifier is ready for operation.
If the
PROTECT LED
lights up, a malfunction is indicated. In this case refer to the chapter TROUBLE SHOOTING.
5
The
REMOTE input
is for the enclosed remote controller. Please refer to the information on the next page.
7
6
5
1
4
2
3
2
3
Содержание XENIUM XE6440-DSP V2
Страница 34: ...34 REMOTE OP IN OP NOTES...
