Estyma IGNEO Touch, Руководство пользователя, Страница: 8 / 16

IGNEO touch user manual
2.1.5 SETTING THE TARGET BOILER TEMPERATURE (program)
To change the boiler target temperature or the boiler working program you should press the button with the
target temperature and the current program on the main screen, and then set the temperature or change the
program.
The programs are described in 3.1.1.
2.1.6 FUEL FILLING (setting the fuel level)
The regulator was equipped with the ability to calculate the remaining fuel in the tank. To make calculating
possible, each time after adding fuel you should set the amount of the fuel in the tank. The amount is set by the
buttons ''+'' and ''-'' or by the slider.
This screen also allows to turn on the fuel conveyor manually. In case of comlete fuel depletion it allows to fill the
conveyor tube again.
To enter the fuel level menu, press the ''8'' button on the main screen.
8 www.estyma.pl
EGP -EN 20171024