Estyma IGNEO Touch, Руководство пользователя, Страница: 6 / 16

IGNEO touch user manual
Chapter 2. Basic controller operation
2.1 M
AIN SCREEN
Screen settings:
NUMBER DESCRIPTION
1 Current time. On pressing, the change of hour screen is displayed.
2
Burner status.
3 Measured boiler temperature.
4 Day of the week. On pressing, the change of date screen is displayed.
5 Measured outside temperature.
6 Set target temperature of the boiler and boiler mode. On pressing it changes.
7 Enter the menu button.
8
Enter the fuel level settings button. The button also displays the rest of the fuel and informs about the
reserves.
9 Quick enter the burner menu button. Lit lamp means the burner is working.
10,11
Quick enter the heating menu button. Lit lamp means the circuit is working.
12 Quick enter the hot water menu button. Lit lamp means that the water preparation is working.
13 Advanced button. Long press (>3 sec) turns the boiler off. Lit lamp means that the boiler is working,
LED description:
LETTER DESCRIPTION
A (green)
Boiler. It is lit if the boiler is working.
B (yellow) Burner. It is lit if there is a flame, it is flashing if the burner is working but there is no flame (eg. inflaming,
putting out). It is not lit if the burner is not working and there is not flame.
C (red)
Alarm. It is flashing if the alarms are active. It is lit if there are unconfirmed alarms.
6 www.estyma.pl
EGP -EN 20171024