Estun ERSA-4C, Руководство по обслуживанию

Страница: 37 / 56

INPUT / OUTPUT UNIT
23
1
2
3
注意吻合
卡住一侧
依次安装
Stick one side
Clip into proper position
Install in sequence
Fig 6.4 Mounting the modules

Install T-BUS terminals:
Install T-BUS terminals on standard U35 guide rail. Generally, the number of T-BUS terminals should match the number of
modules.
。

Install coupler:
Match the slot under the coupler with T-BUS terminals. Mount either end to the guide rail and push the other end. The
coupler is installed after hearing “click” sound.

Install other extensive modules
Install other modules on the right side of the coupler with the same method as shown above.
6.4.3. Notes for Mounting
（
1
）
Sequence of Mounting
Modules of same type are recommended to install with each other, which makes it convenient to observe the working
condition, check and repair the module.