18
When you transport the device for any reason, it is best to use the original casing and packaging
materials. It is recommended that you keep the original packaging materials for the MJ-80.
If the device needs to be returned to Device Manufacturer for Warranty related issues or repair, it is
beneficial that the original packaging or equivalent is used for shipping. Most shipping carriers require at
least 2 inches of packing material around the device.
Due to Joint Commission regulations, any shipping materials including boxes sent to the Device
Manufacturer must be discarded. The device will be returned to you in equivalent packaging.
8.
Safety
The MJ-80 device has been tested and approved as compliant to all the Specifications and
Standards listed in Appendix B Compliance Information, and in the Appendix A Technical
Specifications. Nevertheless, in order to ensure safe operation of your MJ-80 device, there are a
few safety warnings to bear in mind:
Do not disassemble this product. You may receive an electric shock, or foreign matter may enter
and result in a fire. If a malfunction or trouble occurs, immediately turn the power off and unplug
the AC power source. Then contact your supplier’s technical support office for repair.
Do not service or perform maintenance on the device while the device is in use. Make sure to
shut the device down and unplug all cables before starting and service or maintenance work on
the device.
8.1 Power Supply and Batteries
The MJ-80 device contains one rechargeable battery. All rechargeable batteries degrade over
time. Thus, the possible usage times for the MJ-80 after a full charge can become shorter over
time than when the device was new.
The MJ-80 device uses a Li-ion Polymer battery.
If you are in a hot environment, be aware that it can affect the ability to charge the battery. The
internal temperature must be between 0
℃
/32
℉
and 45
℃
/113
℉
for the battery to charge. If
the internal battery temperature rises above 45
℃
/113
℉
the battery will not charge at all.
Avoid exposing the MJ-80 device to fire or to temperatures above 60
℃
/140
℉
. These conditions
may cause the battery to malfunction, generate heat, ignite or explode. Be aware that it is
possible, in a worst-case scenario, for temperatures to reach greater than those stated above in,
for example, the trunk of a car on a hot day.
Only charge the MJ-80 battery in an ambient temperature of 0
℃
/32
℉
to 45
℃
/113
℉
.
Use only the supplied power adapter to charge the MJ-80 device. Using unauthorized power
adapters may severely damage the MJ-80 device.
For safe operation of the MJ-80 device, use only charger and accessories approved by Device
Manufacturer.
Содержание MJ-80
Страница 1: ...User s Manual MJ 80...