To begin assembling your bike,
remove all foam protective sheets
and cable ties and unfold the bike.
Lift up the frame quick release and
open the front frame (1A).
You should be able to hear it click
open. Once clicked, lock the quick
release (1B).
Get Everything Out
Open the folding joint then insert the stem
pillar into the fork tube up to the minimum
insertion line marked on the pillar (2A).
Face the handlebar stem forward, then
tighten the stem pillar bolts to a torque
requirement of or 17–19 N·m (2B).
Close the quick release to lock the
folding stem.
To adjust the handlebar position, please
refer to the manual (2C).
The Handlebar
Electric Folding Bicycle
Model: EST-EFLDBIKE
Look for the letters “R” or “L”
stamped on the pedal spindle (3A).
Thread the pedal marked “R” into the crank
arm on the chain side of the bike. Turn and
securely tighten the pedal spindle in a clock-
wise direction with an M15 wrench.
Repeat for pedal marked “L” ensuring you are
turning the pedal spindle in an anticlockwise
direction.
The Pedals
To assemble the saddle, loosen the
seat clamp, then insert the seat post
into the bicycle frame, making sure that
the minimum insertion mark on the seat
post is completely inserted into the
frame and not visible. At the desired
height, tighten the quick release seat
post binder bolt securely.
Adjust the seat angle to be parallel to
the ground and comfortable for the rider.
Hit the Brakes
The brakes have already been adjusted,
however, if they require some tweaking,
please follow the instruction manual.
The Seat
If you can move the handlebar
forward or backward, the clamp
bolts are not tight enough.
1A
1B
3A
4A
2A
2B
2C
