Take the bike out of the carton
and carefully remove all foam
protective sheets, cable ties and
cardboard.
Screw the fender (mudguard) in at the top of the
crown fork.
Tip: Make sure that the fender isn’t rubbing against
the wheel, if it is, the fender may be screwed in too
tightly, loosen slightly and check again.
Tip: Use scissors to ensure you
don’t damage the bike.
Ensure the fork is front facing. Position
the front wheel in the fork, then tighten
the axle nuts by hand. Check that the
wheel is equally spaced between the
fork tubes, then tighten with a wrench.
Tip: Ensure the wheel
is positioned correctly
so that the fender
(mudguard) is facing
the rear of the bike.
Get Everything Out
The breaks have already been adjusted, however, if
they require some tweaking, please follow the
instruction manual.
Hit The Breaks
Get It Together
Screw It
Quick
Electric Bicycle (Unisex)
Model: ESTC27U
START GUIDE
1
2
3
Fender
