7
Installation
1. Place one corner of the setback
template on the center of the hinge of
the gate. Direct it so it is
perpendicular from the closed gate.
Use the correct setback template for
your degree of opening.
1. Place one corner of the setback
template on the center of the hinge of
the gate. Direct it so it is
perpendicular from the closed gate.
Use the correct setback template for
your degree of opening.
2. Place the boomerang template on the other corner of the setback template. Pivot
the boomerang bracket template to the post so it sits on an L shape bracket that you
hold on the post or column. Mark the boomerang bracket template for trimming.
Trim the boomerang bracket to match the template.
2. Place the boomerang template on the other corner of the setback template.
Pivot the boomerang bracket template to the post so it sits on an L shape bracket
that you hold on the post or column. Mark the boomerang bracket
template for trimming. Trim the boomerang bracket to match the template.
3. Find the height for the post bracket as-
sembly. Place a level on the bottom of a
suitable cross member for the mounting the
gate opener (minimum 1 foot off ground
level) to the gate. Mark the post with a line
at this level.
3. Find the height for the post bracket
assembly. Place a level on the bottom of
a suitable cross member for the mount-
ing the gate opener (minimum 1 foot off
ground level) to the gate. Mark the post
with a line at this level.
