74020-52-00
DUSTOMAT-160 S
7
2. Product identification
2.1 Intended use
The product was designed for use at the following workplaces:
•
Individual work station
•
Group work station
•
Rooms with several work stations
Coordinate any deviating applications with the manufacturer to ensure that the functioning
of the product is not compromised.
The product has been manufactured based on state-of-the-art technology and according
to recognised safety regulations and must be used appropriately and as follows:
•
For commercial use, such as in industrial enterprises and workshops
•
For the extraction of dry, sticky and long-fibre dust
•
For the extraction of non-flammable dust
•
Only for dry cleaning.
Other applications or ones extending beyond these are considered to be improper use.
ESTA shall not be liable for damages due to unintended use.
The manufacturer sets up the product according to the operator’s information.
2.2 Improper use
The product may only be used within the scope of the technical data specified by ESTA.
Uses that exceed the specifications in “Intended Use” are deemed to be inappropriate.
The manufacturer is in this case not liable for resulting damage.
Examples of inappropriate use are:
•
Using or storing the product outdoors
•
Change in the location during operation
•
Use in dust or gas EXPLOSION areas
•
Connecting to processing machines that may produce active ignition sparks or hot
embers
•
Extraction of corrosive gases
•
Extraction of highly flammable or glowing particles
•
Extraction of moist or fluid substances
•
Installation in paint shops
•
Installation in food operations
