Essilor Pro-B 300, Руководство пользователя

Страница: 28 / 140

• Creation of a new job: the alphanumeric keypad is displayed, you can create a new job for the
tracing you have just started (new ID). The two jobs are thus saved.
To cancel, press again.
d. Working in current job mode (job A)
• As soon as the tracer is initialised, you can work in current job mode: the letter A is displayed by
default in the information bar. The job is not saved.
• If you want to save job A, see the job creation procedure
(
F
p.26)
.
• If you want to go back to job A after working on a saved job:
◦ Scan barcode A using the barcode reader (optional), or
◦ Use the numeric keypad and follow the procedure below.
From the tracing screen, press in the action bar to create a new job.
The alphanumeric keypad is displayed.
For more information on keyboard entry and use, refer to the section First steps > Start
working with the digital system > Using the touch screen.
(
F
p.13)
Press to select the ID
&
field.
Press to delete the ID.
Press to confirm.
The letter A is displayed in the information bar.
The tracer is ready for tracing.
For further information, refer to the section concerning your type of job.
3. T
RACING A RIMMED FRAME
(
DEPENDING ON VERSION
)
Prerequisite:
• For correct tracing of the shape, the frame to be traced must not be deformed and its hinges must be
closed.
• For a small frame, place the two wedges between the tracing table clamps:
>
>
1
2
3
4
5
Pro-B 300 > v1.0 - 03.19
28
U
SER
M
ANUAL
> II. T
RACING