Essilor Mr Blue 2.0 страница 51 Скачать руководство пользователя

Страница: 51 / 152

USER MANUAL > CENTERING A LENS

Mr Blue 2.0 > v4.0 -09.16

e. Centering a single vision lens in manual mode

Manual centering enables you to center the lenses which:

cannot be centered in automatic mode

cannot be centered automatically using the three focimeter dots

Prerequisite: The lens must be marked with the focimeter.

The three focimeter dots must be:

Lined up

At the same distance from the central dot

0.5 to 1.5 mm in diameter

Description of the centering target

Optical center of the lens (white cross) and boxing center of the shape (blue cross)

Centering marks

Centering the lens

Press

to select the type of single vision lens.

Press

to select the manual centering mode.

Enter the half-PD and pupillary height.

Position the lens on the clamps and center it in keeping with the target.

You can control the opening and closing of the clamps for better control of the stability of the lens:

Press

to open the clamps.

Press

to close the clamps.

As soon as you place the marked lens on the clamps, the tracer automatically detects the focimeter dots.

You can choose to center the lens on the protective glass: open the clamps completely.

Do not manually center the

(thickness < 0.8 mm) directly on the window. The

precalibrated lenses

(p.149)

lenses would be liable to break during blocking.

Take care not to damage the protective glass with glass lenses.

Press

to zoom.

The clamps close: the image of the centering chamber is displayed in real time.

The white target moves.

Содержание Mr Blue 2.0

























































































































































Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Похожие инструкции для Mr Blue 2.0

Бренды по названию

Популярные бренды

Essilor Mr Blue 2.0, Руководство пользователя

Результаты поиска

Содержание Mr Blue 2.0

Отзывы:

Похожие инструкции для Mr Blue 2.0

Бренды по названию

Популярные бренды