Essilor Medica 700, Руководство пользователя

Страница: 104 / 216

Wave Analyzer Medica 700 User Guide
98
Performing a Diagnostic
You can initiate a new diagnostic procedure by opening the Measure screen . The Measure
screen can be opened from any of the following screens:
Home screen
Patient screen
Results screen
Once the Measure screen is opened, you can prepare the patient and select the test options,
as explained under Preparing to Run a Diagnostic , and then select Go to begin running the
diagnostic tests.
Initiating a Diagnostic from the Home Screen
To initiate a new diagnostic procedure from the Home screen, you need only select the
Measure screen option (#2 in the diagram above ).
Note that if you open the Measure screen directly from the Home screen, no patient is
selected. The system automatically generates a patient name for the results, with "Temp" as
the surname and a number as the first name (e.g., "Temp 1184"). Temporary records remain
in the database until you delete them manually or they are deleted by the system during routine
maintenance. At any time before they are deleted, you can convert them into permanent patient
records by adding patient information to them (see
Modifying a Patient's Information ), or by
cutting the results from the temporary patient record and pasting them into a permanent record
(see
Moving Test Results to a Different Patient ).
Initiating a Diagnostic from the Patient Screen
In the Patient screen, you can initiate a new diagnostic procedure in a number of ways:
Select New Diagnostic with no patient record selected. The Measure screen opens
with a temporary patient name ("Temp" + a number; see above).
Select a patient record and then select New Diagnostic . The Measure screen opens for
the selected patient. After you run the diagnostic procedure, the results are automatically
saved in the selected patient's record.
For a new patient, in the Add Patient dialog box, fill in the the patient's information, and
then select Save and Diag . The patient record is added to the database, and the
Measure screen opens for the new patient. After you run the diagnostic procedure, the
results are automatically saved in the new patient's record.
Initiating a Diagnostic from the Results Screen
When the Results screen is open, either immediately after a diagnostic procedure was
completed, or when the results were loaded from the patient's record (see Loading Test
Results) , select Measure to open the Measure screen for the patient. You can then run
some or all of the tests over again or run additional tests.
24
20
21
36
99
20
93
128
36
124