Essence WeR@Home WeR+, Руководство по установке

Страница: 55 / 60

INSTALLING WITH SCREWS
WeR@Home™ WeR+ Installation Guide 55
S5 Door/window sensor
You can install the door/window sensor with screws. The magnet is always installed with tape.
To install the door/window sensor on a door, door frame, window, or window frame:
1. Drill out the hole guides as follows:
2. Position the wall mount against the door, door frame, window, or window frame.
3. Mark the position of the screws through the holes in the wall mount.
4. Drill holes where marked and insert the wall anchors.
5. Align the wall mount with the wall anchors.
6. Screw the screws through the wall mount, into the wall anchors.
7. Place the door/window sensor against the wall mount and press until the door/window sensor
clicks into place.
8. Peel the tape from the magnet.