16mm R/Head Screw
2
2. Inserting Cams
1. Fitting Cams, Cam Pins, Brackets and Dowels
600 FLOOR STANDING UNIT
Back
Door
Plinth
End Panel RH
CAUTION: Some Fittings are small enough to choke a child.
NOTE: Any additional components left after assembly maybe required for installation-do not discard.
appearance of the units dust regularly with a soft cloth. For grime stains wipe with soft damp cloth using a mild detergent.
discarding any packaging. Lay panels on smooth level surface using outer packaging to protect the finish. To maintain the
PLEASE READ. Carefully open the packs supplied and check the contents against the Panels and Fittings checklist before
Bottom / Shelf
Rebated Rail
16
'L' Bracket
11.
12.
2
Handle Inc Bolts
1/2
1
1
2
1
1
2
1
7.
6.
5.
4.
back of the Hinge Assembly to detatch the plate.
Hinge Assembly
12mm C/Sunk Screw
4
13.
8.
Dowel
End Panel LH
16
10
Cam
Cam Pin
14.
15.
8
10.
9.
1.
2.
3.
Insert all Cams (8), Cams Pins (9) and Dowels (10) into both of the End Panels
(1/2) and the Plinth (7). Fix the 'L' Brackets (12) using the 16mm Screw (11).
Screw the Hinge Plate (13) using the scews supplied. Push the button at the
2
Insert all Cams (8). Point Cam arrow towards the intersecting Cam hole.
3
3
4
5
