SETTING UP THE COMMUNICATOR
Care@Home™ Communicator 2.0 User Guide
7
a.
Clean the mounting surface.
b.
Peel the protective strips off the tape.
c.
Press the Communicator into place.
2.3.2
Table Model
To install the table model:
a.
Place the Communicator into the desk mount.
b.
Place the Communicator in a convenient place, like a living room table or bedroom nightstand.
You can also install the table model on a wall. Refer to 2.3.1 Wall Model on page 6.
2.4.
Testing the Installation
Verify that the Communicator has been installed correctly.
To test the Communicator:
1.
Press the emergency button, or pull the cord, or call out the trigger phrase.
