Esselte LEITZ comBIND 500, Руководство по эксплуатации, Страница: 6 / 130

6
Functional parts of your comBIND 500
F
Punching depth switch – Set to the comb
diameter used. With the correct punching depth
set, your sheets will turn with ease.
G
Binding mechanism – Opens and closes the
plastic combs with help of the binding lever
I
.
H
Comb size scale – Shows the comb size needed
for the amount of sheets to be bound.
I
Binding lever
– Used to open and close
the plastic comb inserted into the binding
mechanism
G
.
J
Cuttings tray – Empty regularly to avoid damage
to the punching mechanism.
A
Lid/paper stand – When opened, the lid acts as
a paper stand to ease punching.
B
Adjustable paper stop – Set to the paper format
used: A4, US letter or A5.
C
Front slot for two-hole punching – Place
sheets here for standard two-hole punching.
D
Rear slot for punching (21 holes)
– Place
sheets here to punch for binding with plastic
combs.
E
Punching lever – Used to punch sheets placed
in the front or rear punching slots. Pull down with
both hands in the middle of the grip plate.
Unpacking and installing the unit
1. Unpacking / scope of supply
• Carefully unpack the unit and inspect it for damage.
• The packaging should contain the following items:
– the comBIND 500,
– the punching lever and two screws,
– a starter set (choice of plastic combs and front/rear covers),
– this operation manual.
• Keep the packaging material at least until the guarantee has expired.
2. Mounting the punching lever
The punching lever must be mounted in such way that marking L is on the left and
marking R is on the right side of the unit.
• Carefully bend the lever a little apart and place it onto the axis.
• Secure the lever with both screws.
3. Installing the unit
• Place the unit on a stable, level surface (e. g. table) .
• Fold back the lid (paper stand) A .
The punching dies were coated with protecting oil during manufacture.
• Punch several sheets of scrap paper in order to clean the punching
dies.
The unit is now ready for operation.
1
2
3
  