Esprit Tech
(1) 321.729.4287
P.O. Box 360815
Support
@
EspritModel.com
Melbourne, FL
https:
//www.espritmodel.com
32936, USA
U
SER
M
ANUAL
F
EATURES
Voltario combines touch switch functionality and a telemetry sensor in a single device. It uses advanced
technology to reach minimum size with an enhanced set of features.
Voltario T30
is designed to turn on/off the electronics in your model. If you use a dedicated receiver battery,
the Voltario can be used to directly replace a mechanical switch. Specifically in thin glider fuselages or models
equipped with a small BEC circuit, the device will offer great benefits like a small size and receiver battery
monitoring. The device remembers its last operating state, and if the battery is accidentally disconnected, the
Voltario will automatically boot up again as soon as the battery is connected again.
Touch switch function.
Duplex EX, Multiplex MSB and Graupner Hott telemetry support (current, voltage, capacity).
Optional low voltage shutdown.
Remembers the last operating state.
Voltario S30
is designed for monitoring power consumption of a single servo. It offers additional possibility to
set the overcurrent protection shutdown.
Duplex EX, Multiplex MSB and Graupner Hott telemetry support (current, voltage, capacity).
Optional high current shutdown with regeneration.
Programmable
o
vercurrent
p
rotection
(0.1A - 20A)
Voltario T30
Voltario S30
Dimensions
25x12x5mm
25x12x5mm
Weight incl. cables
9g
4g
Cables
0.5mm
2
(20AWG)
0.25mm
2
(23AWG)
Continuous current
10A
Peak current (2s)
30A
Standby current
80 µA (touch button active)
Operating current
20mA
Operating temperature
-20 – 85°C
Supply Voltage
4 – 12V
Telemetry
Duplex EX, Multiplex MSB and Graupner Hott
Touch switch support
Yes
No
Overcurrent protection
No
Yes
Selectable touch / mechanical switch/ RC switch
Yes
No
Status LED
Yes (touch button)
No
