Espressif Systems ESP32-LyraTD-SYNA, Руководство пользователя

Страница: 7 / 20

!
2. Configuring for AVS
2.3. Flashing the Firmware
This document captures the process of flashing the firmware on Windows. Please refer to
the
ESP-VA-SDK repository on Github for setup on other platforms.
2.3.1. Driver Installation
Connect the board to a PC with a Micro-USB cable and install the USB-to-UART driver.
2.3.2. Flashing ESP32
!
Figure 2-1. Flash Download Tool
•
In order to build examples of esp-va-sdk, please follow the instructions mentioned on
the
GitHub page .
•
Once you build the Alexa firmware, you will generate three artifacts:
bootloader.bin
,
partitions.bin
and
alexa.bin
.
•
For Flash Download Tool users, follow the instructions given below.
1. Run Flash Download Tool, and click on “ ESP32 Download Tool ” at the interface.
See Figure 2-1 above.
2. Then you will see the interface shown in Figure 2-2 below.
Espressif ! /17 4 2019.09