ESPN XDS Satellite Troubleshooting Guide
Page 1
ESPN XDS SATELLITE TROUBLESHOOTING GUIDE
XDS Pro4 and Pro4Q Receivers
Features of the XDS Pro4 and Pro4Q satellite receiver:
L-Band input (950 MHz – 1450 MHz). A Phase Lock Loop (PLL) LNB (Low Noise
Block Downconverter) is required for nominal operation. A “digital-ready” LNB is not
the same thing and may provide sub-standard performance.
Four (4) audio ports are available on the back of the receiver
Two (2) programmable Netcue relay ports available on the back of the receiver.
Receiver Condition
Indicators
Cause/Resolution
NORMAL
Green SIGNAL and POWER LEDs
illuminated.
LCD display reads:
EB XX.X AG XX
XDS PRO4
(where X = numerical value)
N/A
UNABLE TO FIND
ESPN AUDIO
PROGRAMS ON XDS
CARRIER
Green SIGNAL and POWER LEDs
illuminated. Yellow UPDATE LED
flashing.
LCD display reads:
EB XX.X AG XX
XDS PRO4
PLEASE ACTIVATE
(where X = numerical value)
Receiver logo other than ESPN
(i.e. PRN logo) is displayed.
(Prior to switch, receivers will
display Cumulus or Citadel Media
logo.)
Receiver not set for ESPN
frequency and symbol rate.
Manually tune receiver to ESPN
XDS carrier from SETUP /
TUNER MENU.
AMC-8: FREQ: 01384500 kHz
Symbol: 03333447 SPS
UNABLE TO ACQUIRE
A CARRIER
Green POWER and red FAULT
LEDs illuminated. LCD display
reads:
EB - - AG 0
XDS PRO4
Invalid frequency or symbol rate
settings.
Tune receiver to ESPN XDS carrier
from SETUP / TUNER MENU.
AMC-8: FREQ: 01384500 kHz
Symbol: 03333447 SPS
