Connecting the TriggerBox to
Cameras
Follow these 3 steps and you'll get your Esper TriggerBox up and running in no time. By the end, you'll
have your cameras connected and ready to start using.
Step 1. Connecting your cameras to the TriggerBox
Each camera is connected to a single output socket of the TriggerBox
(fig.1 a)
via a 3.5mm adaptor
cable.
Figure 1.
ESPER TriggerBox - Trigger outputs.
Step 2. Linking multiple TriggerBoxes together
Multiple TriggerBoxes can be connected together to allow for the triggering of more than 6 cameras to
create larger multi-camera setups. Multiple TriggerBoxes are linked by connecting a 3.5mm stereo
cable to the link socket
(fig.2 a)
of the first TriggerBox and then to the input
(fig.2 b)
of the next unit
and repeating down the line.
Figure 2.
ESPER TriggerBox front panel.
5
Содержание TriggerBox
Страница 1: ......
