WORD SYNC OUT
F
E
D
8
Word sync connector
This allows the use of an externally-generated word clock
connection, using a commercially available BNC coaxial
cable.
Connect the WORD SYNC OUT terminal on an amplifier AI-
10 or word clock generator to this unit.
SIGNAL GND connection
Use a commercially available PVC-covered wire to connect
the signal ground terminal on the unit to the amplifier signal
ground on your amplifier.
<
Note that this is NOT an electrical safety ground (earth).
E
D
Connection (2)
Power cord receptacle
After all other connections have been made, insert the
supplied AC power cord into this receptacle, then connect
the other end of the power cord into the wall socket.
<
Although the power cord socket is 3 pin type, it is not
connected to chassis.
<
Use only the supplied Esoteric power cord. Use of other
power cords may result in fire or electric shock. Unplug the
power cord when you are not going to use the unit for an
extended period of time.
Esoteric uses Esoteric MEXCEL stress-free 7N cables as
reference.
Please see the optionally available Esoteric MEXCEL series.
RCA audio cable
XLR digital cable
XLR audio cable
BNC digital cable
RCA digital cable
Speaker cable
F
BNC
coaxial
cable
Master clock generator
(AI-10, G-0s, G25U, AZ-1, etc.)
Supplied
power
cord
Wall socket
