manualshive.com logo in svg

Esoteric N-05XD, Руководство пользователя

Поделиться
Скачать
Esoteric N-05XD Скачать руководство пользователя страница 8

8

Connecting with amplifiers

 

V

 Precautions when making connections

 

o

After completing all other connections, plug the power plug into a power outlet.

 

o

Read the owner’s manuals of all devices that will be connected, and follow their instructions.

The polarity of the XLR connec-
tors can be set so that either 2 or 
3 is HOT (page 26).

R

L

R

L

R

L

RCA cables

XLR cables

Stereo amplifier

Power amplifier 

that supports 

ES-LINK Analog

ES-LINK Analog (ESL-A) 

input connectors

Analog input

(LINE IN, etc.)

XLR cables

Connect using 
a set of only 
one type.

When connected to an amplifier 
capable of volume adjustment, 
set the analog audio output 
level setting (L_VOL>) of the unit 
to FIX, and use the amplifier to 
adjust the volume (page 29).

A 

Analog audio output (LINE OUT) connectors

These output 2-channel analog audio. Connect the XLR or RCA 
connectors to an amplifier.

Use commercially-available cables for connections.

ESL-A/XLR, ESL-A PRE OUT: XLR cables
RCA: RCA cables

Connect an R connector on this unit to an R connector on the 
amplifier, and connect the corresponding unit L connector to 
the corresponding amp L connector.

Change the analog audio output connector setting 
(page  26) and analog audio output level setting 
(page 29) according to the connectors being used.

 

o

The analog audio output connector setting can be set to XLR 
(polarity HOT for pin 2 or 3), RCA or ESLA (page 26).

 

o

When connecting this unit with an amplifier that has ES-LINK 
Analog (ESL-A) connectors, we recommend connecting 
the analog audio output (ESL-A) connectors on this unit 
to the ES-LINK Analog (ESL-A) connectors on the amplifier 
(page 9).

ATTENTION

The ESL-A PRE OUT output connectors of this unit are female-type 
connectors to prevent accidental connection with XLR output 
connectors.

Содержание N-05XD









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды