Esoteric C-02X, Руководство пользователя

Страница: 20 / 28

20
Input source name setting
XLR1=
XLR2=
RCA1=
RCA2=
RCA3=
You can change the names shown on the display for the unit’s con-
nectors when you change the input source. You can set the names as
you like (up to five characters).
You can also set the unit to skip connectors that do not have con-
nected devices when you change the input source.
For example, when a Super Audio CD player is connected to the RCA
2 jacks and a DVD player is connected to the RCA 3 jacks, the RCA 2
and RCA 3 jacks can be set to “SACD” and “DVD” respectively while the
other connectors can be set to “*skip”. When you change the input
source, only “SACD” and “DVD” will be selected, making it easier to
select only the connectors you want to use.
Use the INPUT (
l
and
;
) buttons to select the connector name.
Connector name options: CD, DAC, SACD, DVD, CD-R, DVD-R, TAPE,
MD, TUNER, PC, MP3, AUX, TV, VIDEO, VCR, * skip, (editable)
0
The skip function will not work when all connectors are set to
“*skip”.
Creating your own input connector name
1. When the input connector name (XLR1, XLR2,
RCA1, RCA2 or RCA3) and “=” are shown, press the
INPUT (
l
/
;
) buttons repeatedly until the editable
screen appears (default setting: “
88888
”).
2. Press the ON/LIGHT button.
3. Enter the characters.
Press the INPUT (
l
/
;
) buttons to move the cursor.
Press the VOLUME (+/–) buttons to select characters.
4. When you have finished entering the characters,
press the ON/LIGHT button to confirm the selection.
0
While entering the name, the volume and input cannot be
changed.
0
Available characters
English letters: A-Z, a-z
Numbers: 0-9
Symbols:
! “ # $ % & ‘ ( ) * + , − . / : ; < = > ? @
8
(blank)
Automatic display backlight (FL) off setting
(
FLaOFF>***
)
You can set the display backlight to automatically turn off if no oper-
ation is conducted for a certain amount of time. The default setting is
“30m”.
15m
If no operation is conducted for 15 minutes, the display automatically
turns off.
30m
If no operation is conducted for 30 minutes, the display automatically
turns off.
60m
If no operation is conducted for 60 minutes, the display automatically
turns off.
OFF
The display never turns off automatically.
0
If the display backlight (FL) is left ON with the same indication for
a long time, brightness irregularities might occur. For this reason,
we recommend that you enable the automatic display backlight
off function.
Restoring factory settings
(Setup>***)
You can restore the factory default settings, erasing all changes in
memory. Press an INPUT (
l
or
;
) button until “CLR” blinks, then press
the ON/LIGHT button to execute the restoration of factory default
settings.