User Manual
sili pad
Antiskid Support With Wireless Charger
Shenzhen Esorun Technology Co.,LTD
Information to User
CAUTION
Please read this manual carefully before using this product for your safety and best product
performance. Failure to follow these instructions could result in serious injury, damage to this
product, or damage to other products.
Do not install this product in your vehicle if its location or use would obstruct the driver's clear view
of the road or the operation of any vehicle airbag. It is also the driver's responsibility to know and
comply with the laws, rules, and regulations of the driving location.
Do not place this product in direct sunlight for an extended amount of time, or where it could be exposed
to extreme temperatures. Store out of direct sunlight when not in use.
Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage
to the product, smoke, and overheating could result from contact with liquids.
If you notice smoke or odor from this product, disconnect USB cable immediately. Using the product in this
condition may result in permanent damage to the system.
Do not disassemble or modify this product as there are electronic components inside that may cause an
electric shock.
Keep this manual handy as a reference for safety information.
ACCESSORIES
Wireless charging pad x 1
●
FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY
Product Name: Antiskid Support With Wireless Charger
Model Number: sili pad
Responsible Party Name: Shenzhen Esorun Technology Co.,LTD
Address: 10F, Mingzhuo Building, Mingzhuoxing Industrial Park,Guangming Street, Guangming District,
Shenzhen, China
●
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
●
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‒ Reorient or relocate the receiving antenna.
‒ Increase the separation between the equipment and receiver.
‒ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‒ Consult the dealer or an experienced radio/TV technician for help.
●Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
