256
On/Standby
light
Status light
Lamp light Temp light
Status and solution
Off
Flashing blue
Orange
Orange
Obstacle detection error. A beep
sounds, and the message "For safety
purposes remove any obstacles
blocking the lens." is displayed. The
projector turns off automatically if no
action is taken.
• Make sure that there are no
obstacles interfering with the
projection window. Remove any
obstacles.
• Clean the obstacle sensor if there
are no obstacles.
If the problem persists, turn the
projector off, unplug it, and contact
Epson for help
Note:
If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic:
Related references
Where to Get Help
Projector Setup Settings - Extended Menu
Projector Feature Settings - Settings Menu
Related tasks
Cleaning the Air Filter and Vents
Replacing the Air Filter
Replacing the Lamp
Using the Projector Help Displays
You can display information to help you solve common problems using the projector's Help system.
1.
Turn on the projector.
Содержание 696Ui
