ESD C.2922.02 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 92

background image

Technical Data

7.7 Operating System and License Information

Operating system

QNX 6.5 (Firmware 1.0: QNX 6.4)

Bootloader

U-Boot

License information

This product uses the open source-bootloader "Das U-Boot". The U-Boot-
source code is released under the terms of the GNU Public License (GPL).
The complete text of the license is contained in the esd-document "3rd Party
Licensor Notice" as part of the product documentation.
esd provides the complete bootloader-source code on request.
esd strives to restore all changes on the bootloader into the official sources.
The homepage of the U-Boot project is:

http://www.denx.de/wiki/U-Boot

.

HTTP server

thttpd - tiny/turbo/throttling HTTP server

Copyright
Information

Copyright (C) 1995,1998,1999,2000,2001 by Jef Poskanzer <[email protected]>.
All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided
that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the
following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.

CAN-EtherCAT

Manual • Doc. No.: C.2922.21 / Rev. 1.4

Page 67 of 92

«
...
65
66
67
68
69
...
»

Содержание C.2922.02





























































































Отзывы:

Нет отзывов

Похожие инструкции для C.2922.02

Бренд: Yes Страницы: 2

FXO - RECORD NEW GREETING

Бренд: WELLTECH Страницы: 2

Бренд: Advantech Страницы: 82

Бренд: Ubee Страницы: 103

Бренд: netvox Страницы: 13

Бренд: MAXINCOM Страницы: 55

LOB-GW-HYB-WMBUS

Бренд: Lobaro Страницы: 6

Бренд: VADcore Страницы: 51

Бренд: SmartRG Страницы: 122

Бренд: Guest Internet Страницы: 2

Бренд: Encom Страницы: 33

SC10E4IM Series

Бренд: San Telequip Страницы: 65

Kona Mega Gateway

Бренд: TEKTELIC Communications Страницы: 16

Kona Macro Gateway

Бренд: TEKTELIC Communications Страницы: 32

Бренд: Wildix Страницы: 11

Бренд: Zycoo Страницы: 15

Бренд: Zycoo Страницы: 22

Бренд: ZyXEL Communications Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды